Listening To Songs Loaded From A Computer - Yamaha Arius YDP-135 Owner's Manual

Owner's manual
Hide thumbs Also See for Arius YDP-135:
Table of Contents

Advertisement

Listening to Songs Loaded from a Computer

You can transfer song data from your computer to this instrument and play back the songs. (See page 26 for more
information on loading song data from the computer.)
1
While holding down the [DEMO/SONG] button, press one of
the D 6–C7 keys to select a song to play back.
Song numbers (1 through 10) are assigned to the D 6–C7 keys (see the illustration
below).
The selected song starts playing. Starting with the selected song, playback of the
songs loaded from the computer will continue in the following sequence: any other
songs loaded from the computer, followed by the demo songs, and the 50 piano
preset songs. The sequence then returns to the initial songs loaded from the
computer and repeats until you stop it.
While a song is playing, press the [+] or [–] button to change to the next or previous
song.
2
Press the [DEMO/SONG] button to stop playback.
Selecting a Song Playback Channel
If a song loaded from the computer uses a Voice that is not supported by this
instrument, the originally assigned Voice may not be reproduced accurately. In this
case, switching the song playback channel from "All" to "1 + 2" may improve the
playback sound.
Selecting 1 + 2 song playback channels:
While pressing and holding down the [DEMO/SONG] button and the [PIANO/
VOICE] button simultaneously, press the C7 key.
Channels 1 + 2 produce the sound.
Selecting all song playback channels:
While pressing and holding down the [DEMO/SONG] button and the [PIANO/
VOICE] button simultaneously, press the B6 key.
All channels 1 through 16 produce the sound.
Song 1
Song 10
C7 (highest key)
D 6
C7
Highest key
B6
Highest key
You can load up to 10 songs
or up to 307 KB of data from
the computer.
Use the following table to write
down the song titles you
loaded from the computer.
Key
Song title
D 6
E6
F6
F 6
G6
G 6
A6
A 6
B6
C7
Default setting:
Channels 1+2
The "Default setting" refers to
the factory setting obtained
when you turn on the power to
this instrument for the first
time.
To adjust the tempo of the
song playback, see page 21.
YDP-135 Owner's Manual
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents