Table of Contents
Advertisement
•
Hold - provides a safety measure to avoid users from accidentally
tapping the screen or turning on the device. Move the switch towards the
word Hold to turn off the screen and prevent it from turning back on even
when you tap the screen or press a button. Move the switch towards the
opposite direction to disable this feature.
NOTES
As a precaution, the Power button is automatically disabled
when you remove the Back cover. You can only turn on the
power when the back cover is installed to the unit.
The Back cover is removable, and allows you to remove or
replace the main battery. Refer to section "Setting up MyPal"
on page 1-7 for instructions.
Side features
•
Infrared (IR) port - allows you to copy or send data to another device
with an IR port. For a successful exchange of data, the IR port of both
devices must be properly aligned and facing each other within the IR
communication range.
•
Mini SD slot (A632 only) - accommodates a mini SD memory card.
1-4
Infrared (IR) Port
Mini SD card slot
(MyPal A632 only)
Chapter 1
Advertisement
Chapters
Table of Contents
