Error Messages; Display Information; Track Selection; Fast Forward/Backward Track Selection - Alfa Romeo 159 Owner's Handbook Manual

ERROR MESSAGES

If the CD cannot be read (for example a CD-
ROM was loaded or a CD was loaded upside
down or there is a playback error), the mes-
sage "CD Disc error" will appear on the dis-
play for approximately 2 seconds.
The CD will then be ejected and the audio
source activated prior to the CD mode se-
lection will be heard.
With an external audio source activated (TA,
ALARM or Phone), the CD that cannot be
read will not be ejected until these functions
have ended. At the end, with the CD mode
activated, the display will show the words
"CD Disc error" for a few seconds and then
the CD will be ejected.
318

DISPLAY INFORMATION

When the CD player is operating, the fol-
lowing information will appear on the dis-
play that has the following meaning:
"CD Track 5": indicates the CD track num-
ber;
"03:42": indicates the time elapsed since
the start of the track (if the respective Menu
function is activated).

TRACK SELECTION

(forward/backward)
Briefly press the ÷ button to play the pre-
vious CD track and the ˜ button to play
the next track. The tracks are selected cycli-
cally: the first track is selected after the last
track and vice versa.
If the track has been played for more than
3 seconds, pressing the ÷ button will
cause the track to be started again from the
beginning. In this case, if you want to play
the previous track, press the button twice
consecutively.
FAST FORWARD/BACKWARD
TRACK SELECTION
Keep the ˜ button pressed down to fast
forward the selected track and keep the
÷ button pressed down to play the track
fast backward. The fast forward/backward
function will stop once the button is re-
leased.

PAUSE FUNCTION

To pause the CD player, press the MUTE but-
ton. The words "CD Pause" will appear on
the display.
To resume listening to the track, press the
MUTE button again.
If another audio source is selected, the pause
function is turned off.