Alfa Romeo 159 Owner's Handbook Manual page 189

fig. 10
❒ fit the space-saver spare wheel mak-
ing one of the holes A-fig. 10 co-
incide with the relevant pin B;
❒ Using the wrench provided, fully tight-
en the five fastening bolts;
188
A0E0209m
fig. 11
❒ Lower the car and remove the jack;
❒ Use the wrench provided to fasten
the bolts completely in a criss-cross
fashion according to the sequence
shown in fig. 11.
REFITTING A
NORMAL WHEEL
Following the procedure described pre-
viously, raise the car and remove the
spare wheel.
Versions with steel rims
Proceed as follows:
A0E0210m
❒ Make sure the contact surfaces be-
tween standard wheel and hub are
clean so that the fastening bolts will
not come loose;
❒ Fit the standard wheel taking into ac-
count that pin B-fig. 10 shall coin-
cide with one of the holes A;
❒ Place the wheel cap on the wheel rim
making symbol C, (marked inside the
wheel cap), coincide with the inflation
valve fig. 12;