Important Safety Instructions - Philips 29PFL4508/F4 User Manual

Philips 4000 series led tv 29pfl4508 29" class/po
Hide thumbs Also See for 29PFL4508/F4:
Table of Contents

Advertisement

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments / accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart / apparatus combination to avoid injury
from tip-over.
Wall Mount Bracket Kit
Brand
50PFL3708
PHILIPS
39PFL3708/
PHILIPS
39PFL4408
32PFL3508 /
32PFL4208 /
SANUS
29PFL4508
24PFL4508
SANUS
The recommended Wall Mount Bracket Kit (sold separately)
allows the mounting of the TV on the wall.
For detailed information on installing the wall mount, refer to the
Wall Mount Instruction Book.
P&F Mexicana is not responsible for any damage to the product or
injury to yourself or others if you elect to install the TV Wall
Mount Bracket or mount the TV onto the Bracket on your own.
The Wall Mount Bracket must be installed by experts.
Model #
Screw dimension
M6 x 1.614" (41mm)
SQM6485
with spacer
M6 x 1.614" (41mm)
SQM6435/17
with spacer
SAN18B
M4 x 0.472" (12mm)
MST15
M4 x 0.472" (12mm)
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
Note to the CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Example of Antenna Grounding as per NEC − National
Electric Code
GROUND CLAMP
ELECTRIC SERVICE
EQUIPMENT
P&F Mexicana is not liable for these types of accidents or injury
noted below.
Install the Wall Mount Bracket on a sturdy vertical wall.
If installed onto a ceiling or slanted wall, the TV and Wall Mount
Bracket may fall which could result in a severe injury.
Do not use screws that are longer or shorter than their specified
length. If screws too long are used this may cause mechanical or
electrical damage inside the TV set. If screws too short are used
this may cause the TV set to fall.
Do not fasten the screws by excessive force. This may damage
the product or cause the product to fall, leading to an injury.
For safety reasons use 2 people to mount the TV onto a Wall
Mounting Bracket.
Do not mount the TV onto the Wall Mounting Bracket while
your TV is plugged in or Turned On. It may result in an electrical
shock injury.
When installing the unit on the wall, allow this much space.
Top:
Left and right side:
Bottom:
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE
UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
11.8 inches (30cm)
5.9 inches (15cm)
3.9 inches (10cm)
4
English

Advertisement

Table of Contents
loading

Table of Contents