Screen; Picture - Philips 29PFL4508/F4 User Manual

SCREEN

You can change the screen settings automatically/manually.
1
Press and use ◄► to select
SCREEN
Move Menu
2
Use ▲▼◄► to select the item you want to adjust, then press
OK.
Auto Adjust to adjust the screen settings automatically
Cursor ◄
H-Offset
move PC screen left
V-Offset
move PC screen down
Clock
decrease setting value
Phase
(SCREEN).
Auto Adjust
H-Offset 30
V-Offset 30
Clock 30
0
Phase
Enter Exit
Cursor ►
move PC screen right
move PC screen up
increase setting value

PICTURE

You can adjust the picture settings according to your personal
preference. These settings are automatically stored after exiting the
picture menu.
1
Press and use ◄► to select
PICTURE
Move Menu
2
Use ▲▼◄► to select the item you want to adjust, then press
OK.
to select the desired setting
Picture Mode
(Dynamic, Standard, Mild, and Personal)
Cursor ◄
Contrast
to decrease contrast
Brightness
to decrease brightness
Color
to decrease color intensity to increase color intensity
Tint
to add red
Sharpness to soften
to select the desired setting
Color Temperature
(Cool, Medium, and Warm)
to select the desired setting
Noise Reduction
(Off, Low, Middle, and High)
to select the desired setting
Dynamic Contrast
(On and Off)
Note
• You can change Picture Mode easily using P.MODE on the remote control. Press
P.MODE repeatedly to select the picture mode you want. In this function, you can also
assign the picture mode individually to each input mode.
• You can adjust Contrast, Brightness, Color, Tint and Sharpness, if you set Personal in
Picture Mode.
• While adjusting each setting of Picture Mode, Contrast, Brightness, Color, Tint and
Sharpness, you can change the setting item using ▲▼.
(PICTURE).
Picture Mode Standard
Contrast 50
Brightness 50
Color 50
Tint 50
Sharpness 30
Color Temperature Medium
Noise Reduction Middle
Dynamic Contrast Off
Enter Exit
Cursor ►
to increase contrast
to increase brightness
to add green
to sharpen
21
English