Watching Channels From An External Device; Sleep Timer; Switching Audio Mode; Using Favorite Mode - Philips 29PFL4508/F4 User Manual

Watching channels from an external device

Switching Each Input Mode can easily switch with the remote control
between Analog TV and external devices when they are connected to
the unit.
1
Turn On a set-top box or the connected device.
Input Source
2
Press SOURCE and use ▲▼ to select the the connected
device and wait a few seconds till the picture appears.

Sleep timer

Sleep Timer can set the unit to go into Standby mode after an
incremental period of time.
Press SLEEP repeatedly to change the amount of time.
Available options are: Off / 10 min / 20 min / 30 min / 60 min / 90
•
min / 120 min / 180 min / 240 min.
Press SLEEP once to call up the display for checking the remaining time.
• To cancel sleep timer, press SLEEP repeatedly until Off is displayed.
ATV
AV
YPbPr
HDMI 1
HDMI 2
HDMI 3
PC
Media
OK Enter

Switching audio mode

1
Press SAP to display the currently selected audio mode.
2
While receiving an MTS broadcast, press repeatedly to cycle
through the available audio channels.
e.g.) When all audio are available
STEREO MONO
STEREO :
Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio

Using favorite mode

You can easily locate and watch a favorite channel.
1
Press FAV while watching a program to show the favorite channel
list.
1 TF1 HD
2 FR 2 HD
6 M6HD
2
Use ▲▼ to select the channel you want, then press OK.
Note
• To set the favorite channel, refer to Program Edit ➟ p.20
• Use CH + / − to move to the previous or next page.
• This unit need few seconds to memorise the favorite setting.
• If you unplug the AC power cord immediately after the setting, It will not be registered
in the memory.
SAP
Favorite List
ATV
ATV
ATV
ENTER
17
English