Asante AeroLAN AL1011 Quick Installation Manual

FriendlyNET ®
Introduction
Thank you for purchasing an Asanté FriendlyNET
Plug and Play Networking Solutions
AeroLAN PCMCIA Wireless Adapter. This adapter is designed to
be the most economical way to add wireless functionality to
your small business or home office network.
I
This wireless PC Card is compatible with Asanté
FriendlyNET wireless routers, Apple AirPort
IEEE 802.11b devices.
I
Dual-Platform support; driver support for Mac OS
and Windows
I
Easy to install – simply install the card into an available
PC Card slot, run the Installer or Wizard, and start using
your new adapter!
Quick Installation Guide
I
Free telephone technical support when used with Windows
95/98/Me/NT/2000/XP and Mac OS 8.6 through OS 9.2.
AeroLAN ™ AL1011 Wireless
Packing List
Your package contains the following items:
PCMCIA Adapter
I
FriendlyNET AeroLAN PCMCIA Wireless Adapter
I
This Quick Installation Guide
I
Drivers Utility CD-ROM
System Requirements
I
Macintosh Minimum Requirements: Apple PowerBook
running Mac OS 8.6 up to 9.2 with 32MB RAM
I
PC Minimum Requirements: Pentium 133 with 32MB
RAM; Microsoft Windows 95, 98, Me, NT 4.0, XP, and 2000
Professional
Making Networking Simple
Hardware Installation:
Here's how to install this adapter:
™ and other
Installing the Adapter into a laptop
1. Turn off the power to the laptop.
2. Insert the PC card into any available PC Card slot in
your laptop.
3. Turn on the power to your computer and allow the
computer to start up to the desktop.
Software Installation:
Follow the steps below to install the device driver and
wireless configuration utility for the AeroLAN Wireless
Adapter.
Driver Installation:
1. Follow the hardware installation instruction to install
the AeroLAN adapter into your laptop computer and
insert the provided driver utility CD into your CD-
ROM drive.
2. Install the drivers from the provided CD-ROM:
a. Windows – follow the Hardware Installation
Wizard and locate the driver on the CD-ROM.
b. Macintosh – locate the Installer in the Macintosh
1
folder on the CD-ROM and follow the on-screen
instructions.
2 3
3. Reboot the computer.
Installing AeroLAN Wireless Configuration Utility
Installing the adapter into FriendlyNET (Windows only)
FR3002AL Wireless Router
1. After installing the device driver, locate the "Utility"
1. Disconnect power from the router. Carefully insert folder in the provided CD-ROM and double click on
the AeroLAN Wireless Adapter into the PCMCIA slot in "Setup".
the back of the router. Make sure the AeroLAN label
2. Follow the on-screen instruction to install the
faces up and the adapter sits firmly in the slot.
wireless configuration utility.
2. Connect a network cable from the router to your
3. Re-boot the computer when prompted.
cable/DSL modem.
3. Plug the power module into an electrical outlet and
insert the power jack into the router.
Visit Asanté at www.asante.com
Main Corporate Telephone Numbers
800-662-9686 (Home/Office Solutions)
800-303-9121 (Enterprise Solutions)
408-435-8388
Technical Support
801-566-8991 (Worldwide)
Technical Support Fax
801-566-3787
Making Networking Simple
Copyright © 2001 Asanté Technologies, Inc. Asanté and
FriendlyNET are registered trademarksof Asanté
Technologies, Inc. AeroLAN, AsantéCare, and the Asanté
logo are trademarks of Asante Technologies, Inc. All
other brand names and products are trademarks or
registered trademarks of their respective holders. All
features and specifications are subject to change
without prior notice. 06-00605-02, 12/01