Wireless Statistics - TP-Link TL-WA850RE User Manual

300mbps universal wireless n range extender
Hide thumbs Also See for TL-WA850RE:
Table of Contents

Advertisement

TL-WA850RE
Operation Mode - Shows the current Operation Mode.
Transmit Power - Specifies the transmit power of the device. You can select High, Middle
or Low which you would like. High is the default setting and is recommended.
Beacon Interval - Specifies a value between 40-1000 milliseconds. The beacons are the
packets sent by the device to synchronize a wireless network. Beacon Interval value
determines the time interval of the beacons. The default value is 100.
RTS Threshold - Specifies the RTS (Request to Send) Threshold. If the packet is larger
than the specified RTS Threshold size, the device will send RTS frames to a particular
receiving station and negotiate the sending of a data frame. The default value is 2346.
Fragmentation Threshold - This value is the maximum size determining whether packets
will be fragmented. Setting the Fragmentation Threshold too low may result in poor network
performance since excessive packets. 2346 is the default setting and is recommended.
DTIM Interval - Determines the interval of the Delivery Traffic Indication Message (DTIM).
You can specify the value between 1-255 Beacon Intervals. The default value is 1, which
indicates the DTIM Interval is the same as Beacon Interval.
Enable WMM - WMM function can guarantee the packets with high- priority messages being
transmitted preferentially. It is strongly recommended enabled.
Enable Short GI - This function is recommended for it will increase the data capacity by
reducing the guard interval time.
Enable AP Isolation - Isolates all connected wireless stations so that wireless stations
cannot access each other through WLAN.

4.6.5 Wireless Statistics

Selecting Wireless > Wireless Statistics will allow you to see the wireless transmission
information in the following screen shown in Figure 4-22.
Figure 4-22 Statistics of the device attached wireless stations
Operation Mode - Shows the current operation mode
MAC Address - Shows the connected wireless station's MAC address
300Mbps Universal Wireless N Range Extender User Guide
26

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents