Remove Moisture From All Camcorder Surfaces - Toshiba CAMILEO BW20 User Manual

18
Getting Started

Remove moisture from all camcorder surfaces

NOTE
NOTE
Remove moisture from all camcorder surfaces
Moisture may get inside the camcorder while opening a cover if
moisture adhering to the crevices in the slot cover and port cover is
not properly wiped off.
To completely remove all moisture, follow the steps below:
1 Gently shake the camcorder to shake off excess water drops.
2 Wipe off any moisture from the area around the cover with a
soft cloth.
❖
The recommended capacity of an (optional) Micro SD™ Card is 1 GB
or greater.
To prevent data corruption, format the Micro SD™ Card in the
camcorder before using.
All data will be erased when the Micro SD™ Card is formatted. Make
sure that all data is copied to your computer or other media before
formatting the Micro SD™ Card.
When a Micro SD™ Card is inserted, photos and videos are saved
onto the Micro SD™ Card rather than in the built-in memory.
Close the slot cover and port cover securely.
If any cover is not closed or is not closed completely, the camcorder
will no longer be waterproof. When closing a cover, make sure that
no foreign object such as sand, hair, dust, etc. is caught in the rubber
seal.
Make sure that water does not get inside the camcorder
when opening the cover.