Single Button Connection Manager; Selecting Startup Options - Neoware e140 - Thin Client User Manual

Using Connections
Single Button
Connection
Manager
Selecting startup
options
Tip
You can set all your con-
nections start automati-
cally. To learn how, see
page 37.
76 Starting a ICA or RDP connection
2
Double-click a connection name (or the following options).
Or click a connection name, and then click Connect or press the
Enter key.
↑ ↓
Or press or to highlight a connection name, and then press
Enter.
To use the default connection, simply click Connect or press
Enter.
3
If Automatic Logon wasn't selected for the connection, type
your logon information, and then click OK.
You can start more connections now.
If the appliance is set to display the Single Button Connection Man-
ager then clicking the Connect button starts the default server con-
nection on the appliance. Note: See "Selecting startup options"
below to learn how to specify which server connection is the default.
As startup options, you can select a default and an autostart connec-
tion. The default connection is highlighted in the Connection Man-
ager. An autostart connection starts whenever your Neoware
appliance does.
If you don't select a default connection, the first connection listed in
the Connection Manager will be used. The autostart connection, if
any, also functions as the default connection. Selecting another
default connection returns the autostart connection to normal status.
1
In the Connection Manager Configure tab, click a connection
name.