Adding Additional Profiles - Neoware c50 - Thin Client User Manual

Adding Additional
Profiles
snapins.txt
This file contains the directory name of the snap-in(s) you wish
to install. For example "Citrix ICA Client v9" (no quotes). This
entry in the snapins.txt file would require the existence of
"\neoware\xpe\shared\snapins\Citrix ICA Client v9" on your
FTP server.
Snap-ins should be named one-per-line.
image.dd (not included in ezUpdate server package)
This is the image to be used for this profile when a full image
update is requested. The image.dd file is not included as part of
the ezUpdate server setup package. Download the operating sys-
tem update package(s) needed from
http://www.neoware.com/downloads/, install the update pack-
age(s) on your ezRemote Manager server, and then copy the cor-
rect image.dd file to the appropriate ezUpdate directory.
Note: When copying the image file to the ezUpdate directory,
make sure that you place it into the correct Flash disk size loca-
tion.
\neoware\xpe\shared\
d_drive\
This directory contains the scripts used when performing full
image updates.
snapins\
This directory contains the snap-ins, each in their own directory.
No snap-ins are included as part of the server setup package.
Simply download the package(s) needed from
http://www.neoware.com/downloads, install on your server, and
copy the appropriate directories to the ezUpdate
\shared\snapins directory.
Additional profiles can be added by creating additional subdirecto-
ries, such as \Neoware\xpe\256P640\sales\. The same
ezUpdate for XPe
FTP Server Setup 57