ezRemote Manager
tasks that work
with by Auto Wake
on LAN
Configuring
automatic Wake on
LAN (Auto WOL)
again. If there is still no response, ezRemote Manager will repeat the
cycle until the remote appliance wakes and responds. If the appli-
ance doesn't respond after seven attempts, ezRemote Manager
shows a time-out error in the log, and moves on to the next appliance
in the list to update.
These are the tasks that are affected by the Auto WOL setting:
All Software Manager functions (See "CHAPTER 5, Updating
•
Appliance Software" on page 33)
All Connection Manager functions (See "CHAPTER 6, Connec-
•
tion Manager" on page 39)
All Properties Manager functions (See "CHAPTER 7, Properties
•
Manager" on page 49)
All Snap-Ins Manager functions (See "CHAPTER 8, Snap-In
•
Manager" on page 59)
All ezAnywhere shadowing functions (See "CHAPTER 9, ezA-
•
nywhere Shadowing" on page 63)
Configure Automatic Wake on
LAN (Auto WOL) through the
Auto Wake on LAN dialog:
1
Select
Auto Wake-on-LAN
the Settings menu.
2
In the Auto Wake on LAN dia-
log, click
to turn on Auto-
Enable
matic Wake on LAN. Click
to turn off Automatic
Ignore
Wake on LAN.
3
Click
to save the setting.
OK
Automatic Wake on LAN (Auto Wake on LAN)
Wake on LAN Operations
from
77