Selecting A Connection Template (Ce); Saving The Session Configuration (Xpe); Save Using Current Session Name - Neoware c50 - Thin Client User Manual

Setup Menus

Selecting A Connection Template (CE)

The Open Session dialog box enables you to select a connection template to use when
the terminal is not in WBT mode. This is displayed by selecting Open Session... in the
File menu.
The Description list box displays the names of connection templates that were created
using the Save Session As dialog box. The descriptive name of the connection
template currently in use is highlighted. The factory default connection template is
Untitled. Clicking one of the descriptions then the OK button will cause the dialog
box to close and the connection template associated with the chosen description will be
actioned.
You can specify a particular connection template to use by default by clicking the
required description, checking the Save As Default check box, then clicking the OK
button. To delete a connection template, select the description then click the Delete
button.

Saving The Session Configuration (XPe)

When running TeemTalk for Windows XPe, you can either save the session
configuration using the current session name, or you can save it under a new session
name if TeemTalk was started without a session (i.e. not started by clicking on a
desktop icon or by selecting a session from the Start menu).

Save Using Current Session Name

To save the session configuration using the current session name, select Save Session
in the File menu. If you were using a session template and modified the settings, a
local copy of the template will be made with the same name, but with the changed
settings. This copy will replace the template in the list of session configurations
displayed in the Open Session dialog box. Note that the T template indicator will no
longer be displayed.
6-6