Dialog Boxes - Neoware c50 - Thin Client User Manual

Setup Menus

Dialog Boxes

Selecting an option which is followed by an ellipsis (...) will cause a dialog box to be
displayed. The example shown below is displayed by selecting the Block
Transmission... option in the Settings menu.
There are four basic methods for changing settings within the dialog boxes.
Options preceded by a check box, such as Send Unprotected Only in the example
above, are true or selected when the box contains a ✔, and false or unselected when the
box is empty. Click the pointer in the box to toggle the setting on or off, or press the
spacebar on the keyboard.
When a group of options preceded by round buttons are enclosed in a box, such as the
PF Key Effect options in the example above, only one of these options is selected or
true at any one time. The currently selected option is indicated by a button with a dark
centre. These buttons behave just like radio buttons in that clicking one will cause the
previously selected button to be deselected.
Some options require you to type information in a text box, such as the End of Line
Characters option.
When an option has many possible settings, these will be shown in a list box. The
Alpha Emulation option in the Emulation Settings dialog box is an example of this.
To make a selection using the mouse, click the arrow button to display a drop-down
list box then click on the setting required. If the list is long a scroll bar may be
displayed. To make a selection using the keyboard, press the up or down cursor keys
to cycle through the available settings until the one required is highlighted in the box.
6-3