Bq 3107 Emulation; Session Configuration; Wbt Mode - Neoware c50 - Thin Client User Manual

Teemtalk 5.0 for windows ce & xpe
Hide thumbs Also See for Neoware c50 - Thin Client:
Table of Contents

Advertisement

This chapter describes the Bull BQ 3107 terminal emulation.

Session Configuration

WBT Mode

This section describes the basic procedure for creating a session configuration when
the terminal is in WBT mode. The options available are described in detail in chapter
2.
1. Click the Configure tab in the Terminal Connection Manager then click the
Add button to display the New Connection dialog box.
2. Select Terminal Emulation Client and click OK. The Terminal Emulation
Client Connection Wizard - Connection Information dialog box will be
displayed.
3. Enter a name which will identify this session configuration for future selection in
the Connection Name box.
4. Select the BQ3107 terminal emulation in the Emulation list box.
5. Click Next to display the Host Information dialog box.
For a TCP/IP connection, click the TCP/IP button, enter the name or internet
address of the host computer in the Host Name box, then click Advanced for
additional Telnet options. Refer to the TCP/IP Connection Settings section in
chapter 2 for details.
For a modem connection, click the Modem button then click Advanced to
display configuration options. Refer to the Modem Connection Settings section in
chapter 2 for details.
For a serial connection, click the Serial button, specify the communications port
in the Connect To box, then click Advanced for additional serial options. Refer
to the Serial Connection Settings section in chapter 2 for details.

BQ 3107 Emulation

BQ 3107 Emulation
8
8-1

Advertisement

Table of Contents
loading

Table of Contents