Keyboard Mapping - Neoware c50 - Thin Client User Manual

Teemtalk 5.0 for unix
Hide thumbs Also See for Neoware c50 - Thin Client:
Table of Contents

Advertisement

Getting Started
The AT 386 emulation provides compatibility with software designed to drive the
AT&T AT 386 terminal.
The AT&T4410 emulation provides compatibility with software designed to drive the
AT&T Dataspeed 4410 terminal. Refer to the AT&T 4410 Emulation section later.
The BQ3107 emulation provides compatibility with software designed to drive the
Bull BQ 3107 terminal. Refer to the BQ 3107 Emulation chapter for details.
The DG410 emulation enables you to run applications written for the Data General
D410 terminal. Refer to the DG410 Emulation chapter for information on keyboard
mapping.
DOC18 emulates VT220+ (DOC-18). It runs the VT300 8-bit emulation, sets the
numeric keypad to application mode, sets the display to 25 lines and enables a
special character set. The function of the keys F1 to F4 on the numeric keypad are
mapped to the first four function keys in the set of F1 to F12 function keys, and F5 to
F12 perform the same functions as the equivalent keys on the VT220 keyboard.
The HP70092 emulation enables you to run applications written for the Hewlett
Packard 700/92, 2392A and 2622A terminals. Refer to the HP700/92 Emulation
chapter for details.
The HZ 1500 emulation provides compatibility with software designed to drive the
Hazeltine 1500 terminal, as emulated by the Wyse WY-50/50+/60 terminals. Refer to
the Wyse Emulations chapter for more details.
The IBM 3151 emulation provides compatibility with software designed to drive the
IBM 3151 terminal. Refer to the IBM 3151 Emulation chapter for information.
The IBM 3270 emulation provides compatibility with software designed to drive the
IBM 3270 terminal. Note that the initial display will be an ASCII text screen known as
the Network Virtual Terminal Mode. You are required to make a host connection
using the Telnet facility supplied with TeemTalk in order to display the IBM 3270
screen and enable the emulation to function correctly. The setting of the Model option
in the IBM 3270 Settings dialog box determines the size of the display and whether or
not extended attributes are supported (this must only be changed while running the
IBM 3270 emulation and the new setting will not take effect until you save it and
restart TeemTalk). Refer to the IBM 3270 Emulation chapter for more information.
The IBM 5250 emulation provides compatibility with software designed to drive IBM
5250 type alphanumeric terminals. This emulation can be used for connection to an
IBM AS/400, System/36 or System/38. Note that the initial display will be an ASCII
text screen known as the Network Virtual Terminal Mode. You are required to make a
host connection using the Telnet facility supplied with TeemTalk in order to display
the IBM 5250 screen and enable the emulation to function correctly. Refer to the IBM
5250 Emulation chapter for more information.
The ICL7561 emulation is not currently supported by TeemTalk.
The MDI P8/P12 emulation provides compatibility with software designed to drive
the McDonnell Douglas Prism-12 and Prism-8 terminals.
3-7

Advertisement

Table of Contents
loading

Table of Contents