Installing From Cd; Installing From Tape - Neoware c50 - Thin Client User Manual

Teemtalk 5.0 for unix
Hide thumbs Also See for Neoware c50 - Thin Client:
Table of Contents

Advertisement

Installing TeemTalk On UNIX Based Products

Installing From CD

To install TeemTalk from the CD:
1. Log in as root, change to the root directory of the CD and run the
TeemTalk installation script.
2. When prompted, specify the product type and Unix system that
you are installing to.
Thereafter the installation will continue automatically.
Details on how to install the licence key and further information
on the installation are included in the file readme.

Installing From Tape

Super-user privileges will be required to perform the installation.
To install TeemTalk from the tape:
1. Create a temporary directory into which the contents of the tape
can be placed. For example:
2. Extract the tape contents using the following command:
where <device_name> is specific to each machine type, as listed
in the table on the previous page.
Note: In all cases the device specified should reference the no-
3. Execute the ./readtape loader script. This will list a number of
machine targets and graphic user interface (GUI) styles. Select
the one that matches your machine model. ./readtape will then
load the required files for your system.
4. Execute the ./install installation script. This will move the
extracted files to the correct destination directories as well as
converting font definition files to the architecture of your machine.
2-2
mkdir /teemtalk_temp
cd /teemtalk_temp
tar xvf /dev/<device_name>
rewind tape device.
./install

Advertisement

Table of Contents
loading

Table of Contents