Acer Bluetooth 1.2 USB Dongle User's Manual
The Bluetooth Dial-up Networking application allows this computer to use a modem that is
physically connected to a remote device to access the Internet, log on to a remote network.
Open a connection to the Dial-up Networking service that is provided by another Bluetooth
device using one of these techniques:
Windows system tray, Bluetooth icon
From My Bluetooth Places
Using the Bluetooth Setup Wizard
After the Bluetooth dial-up networking connection is established it can be used the same
way as any other networking connection. For example, you can open a browser and explore
the World Wide Web, if the remote computer has Internet access.
Close a Dial-up Networking connection
If the connection was established via the Bluetooth icon in the Windows system
tray; click the Bluetooth icon, select Quick Connect, Dial-up Networking and then
select the device that is providing the service (active connections have a
checkmark in front of them).
No matter how the connection was created, In My Bluetooth Places, right-click the
service name and select Disconnect.
The Bluetooth Configuration Panel > Client Applications > Dial-up Networking > General
tab provides options to configure:
The application name—to change it, highlight the existing name and enter the new
Enable or disable secure connection. To enable secure connection, place a
checkmark in the box.
The Bluetooth virtual device to be used.
NOTE: Unless you have a specific reason to do so, DO NOT CHANGE the default Bluetooth
device or alter the device's configuration.