Removing The Touchpad Bracket, The Touchpad Board And The Touchpad - Acer Aspire 9100 Series Service Manual

Removing the Touchpad Bracket, the Touchpad Board and the Touchpad

1. See "Removing the Battery" on page 44.
2. See "Removing the Middle Cover" on page 47.
3. See "Removing the Keyboard" on page 47.
4. See "Removing the Power Board" on page 52.
5. See "Removing the Upper Case Assembly" on page 52.
6. Pull back the tape covering the touchpad FFC.
7. Disconnect the touchpad FFC the remove it.
8. Remove the four screws securing the touchpad bracket.
9. Slide the touchpad bracket back as shown.
10. Then remove the touchpad bracket.
11. Use a flat headed screw driver to detach the touchpad board.
12. Then detach the touchpad carefully.
53 Chapter 3