Paper Feeding Problems - Samsung SL-M2625D User Manual

Paper feeding problems

Condition
Paper jams during printing.
Paper sticks together.
Multiple sheets of paper do not feed.
Paper does not feed into the machine.
The paper keeps jamming.
Transparencies stick together in the paper
exit.
Envelopes skew or fail to feed correctly.
Clear the paper jam.
• Check the maximum paper capacity of the tray .
• Make sure that you are using the correct type of paper.
• Remove paper from the tray and flex or fan the paper.
• Humid conditions may cause some paper to stick together.
Different types of paper may be stacked in the tray. Load paper of only one type, size, and weight.
• Remove any obstructions from inside the machine.
• Paper has not been loaded correctly. Remove paper from the tray and reload it correctly.
• There is too much paper in the tray. Remove excess paper from the tray.
• The paper is too thick. Use only paper that meets the specifications required by the machine.
• There is too much paper in the tray. Remove excess paper from the tray. If you are printing on special materials, use the
multi-purpose tray (or manual feeder).
• An incorrect type of paper is being used. Use only paper that meets the specifications required by the machine.
• There may be debris inside the machine. Open the front cover and remove any debris.
Use only transparencies specifically designed for laser printers. Remove each transparency as it exits from the machine.
Ensure that the paper guides are against both sides of the envelopes.
Suggested solutions
195
5. Troubleshooting