Setting Up The Printer - Samsung SL-M2625D User Manual

Installing driver over the network

Setting up the printer

To add the printer to your UNIX system, run 'installprinter' from the command
line. This will bring up the Add Printer Wizard window. Setup the printer in this
window according to the following steps:
1 Type the name of the printer.
2 Select the appropriate printer model from the model list.
3 Enter any description corresponding to the type of the printer in the
Type field. This is optional.
Specify any printer description in the Description field. This is optional.
4
5 Specify the printer location in the Location field.
6 Type the IP address or DNS name of the printer in the Device textbox for
network-connected printers. On IBM AIX with jetdirect Queue type,
only the DNS name is possible-numeric IP address is not allowed.
7 Queue type shows the connection as lpd or jetdirect in the
corresponding list box. Additionally, usb type is available on Sun Solaris
OS.
Select Copies to set the number of copies.
8
Check the Collate option to receive copies already sorted.
9
Check the Reverse Order option to receive copies in the reverse order.
10
11 Check the Make Default option to set this printer as default.
12 Click OK to add the printer.
2. Using a network-connected machine
115