Samsung UN65F6300AF E-Manual page 163

Hide thumbs Also See for UN65F6300AF:
Table of Contents

Advertisement

There is something
wrong with the TV.
Unable to find a
Channel
The TV image does not
look as good as it did
in the store.
The picture is distorted.
The color is wrong or
missing.
The color is poor or
the picture is not bright
enough.
There is a dotted line
on the edge of the
screen.
The picture is black
and white.
The color is wrong or
missing.
Setup (System
> Setup) or
Run
Store displays are all tuned to digital, HD (high definition) channels.
If you have an analog cable/set top box, upgrade to a digital set top box. Use
HDMI or Component cables to deliver HD (high definition) picture quality.
Many HD channels are upscaled from SD (Standard Definition) content. Look for a
channel that is broadcasting true HD content.
Cable/Satellite Subscribers: Try HD channels from the channel lineup.
Air/Cable Antenna Connection: Try HD channels after performing the Auto
Program operation.
Adjust the cable/satellite box's video output resolution to 1080i or 720p.
The compression of video content may cause picture distortions, especially in fast
moving pictures such as sports and action movies.
A weak or bad quality signal can cause picture distortions. This is not an issue
with the TV.
Mobile phones used close to the TV (within 1m) may cause noise in analog and
digital channels.
If you're using a Component connection, make sure that the component cables are
connected to the correct jacks. Incorrect or loose connections may cause color
problems or a blank screen.
Picture
Navigate to
and adjust
other picture adjustment settings.
Energy Saving (System
See if
Try resetting the picture.
Picture Size
If
is set to
Change the cable/satellite box resolution.
If you are using AV composite input, connect the video cable (yellow) to the TV's
green component jack.
If you are using a Component connection, make sure that the component cables
are connected to the correct jacks. Incorrect or loose connections may cause
color problems or a blank screen.
Try this!
Auto Program (Broadcasting
Picture
Mode, Brightness, Sharpness, Color, and
Eco Solution
>
Reset
Picture)
(Picture
>
Screen
Fit, change it to 16:9.
Auto
>
Energy
Saving) has been enabled.
>
Program).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents