Making Xtn Compatible With Rdx Radios - Quick Instructions - Motorola RDU2020 - RDX UHF - Radio Owner's Manual

MAKING XTN COMPATIBLE WITH RDX RADIOS - QUICK INSTRUCTIONS

The following instructions are a quick and easy way to make your XTN (XV1100, XV2100 and
XV2600 models) compatible with RDX Series™ default frequencies:
1. Make sure your XTN is programmed to the factory default frequencies (Turn your radio ON while holding the
MENU and PTT buttons simultaneously for three seconds).
2. Program Channel 1 with Frequency # 20 (154.4900 Mhz) and Channel 2 (for XV2600 model only) with
Frequency # 21 (154.5150 Mhz).
Channel
• Due to FCC regulations, the highlighted frequencies are different from the XTN default
values. Make sure to choose a compatible frequency whenever you need to
interoperate with XTN series.
• (**) Former XTN frequencies # 3 (154.5700 MHz) and # 4 (154.6000 MHz) are
considered MURS frequencies and are not available in the RDX Series™.
64
English
XTN VHF Default Frequencies
Frequency #
1 **3
2 **4
3 1
4 2
5 10
6 12
Frequency
Code
(Mhz)
154.5700 67.0 Hz
154.6000 67.0 Hz
151.6250 67.0 Hz
151.9550 67.0 Hz
151.5125 67.0 Hz
151.6850 67.0 Hz
Bandwidth
25.0 kHz
25.0 kHz
25.0 kHz
25.0 kHz
25.0 kHz
25.0 kHz