Table of Contents
Advertisement
CONTROLLING iPod™
In addition to controlling this unit, you can operate your iPod stationed in a terminal using the supplied remote control.
Using iPod™
Once you have stationed your iPod in a terminal on the top panel of this unit (see page 12), you can enjoy playback of
your iPod using the supplied remote control. The operations of your iPod are available with the aid of front panel display
(menu browse mode) or without it (simple remote mode).
Notes
• Only iPod (Click and Wheel), iPod nano, iPod mini, and iPod touch are supported.
• Some features may not be compatible depending on the model or the software version of your iPod.
y
• For a complete list of the remote control functions used to control your iPod, refer to "iPod mode" (see page 7).
• For a complete list of status messages that appear in the front panel display, refer to the "iPod™" section in "TROUBLESHOOTING"
(see page 23).
STANDBY ON
iPod
CD
FUNCTION
FUNCTION
Center
DISPLAY
MUTE
20
En
CONTROLLING iPod™
SLEEP
iPod
FM
USB
FM
PRESET
TUNING
MEMORY
MENU
MENU
/
FOLDER
SHUFFLE
REPEAT
VOLUME
■ Simple remote mode
In the simple remote mode, you can operate the iPod menu
by viewing the iPod using the iPod controls or the
supplied remote control.
1
Press iPod to set this unit to the iPod mode.
2
Press FUNCTION and
MODE on the front panel display and press
Center.
3
Press
/
to select SIMPLE REMOTE.
Press Center while SIMPLE REMOTE is
blinking on the front panel display.
• You can also select the menu browse mode by
pressing
/
on the front panel display. For details, refer to
page 21.
4
Use MENU/
/
iPod menu, and then press Center to start
playback of the selected song (or group).
/
to show iPod
so, MENU BROWSE appears
/ Center to operate the
Advertisement
Table of Contents
