Figure 5-7: L2Tp Connection Type; Figure 5-8: Telestra Cable Connection Type - Linksys WRK54G User Manual

Wireless-G Broadband Router
• L2TP. Layer 2 Tunneling Protocol (L2TP) is a service that applies to connections in Europe only.
User Name. Enter the User Name provided by your ISP.
Password. Enter the Password provided by your ISP.
L2TP Server. Enter the IP address of the L2TP server you are using; this should be provided by your ISP.
Connect on Demand. If you want the Router to end the Internet connection after it has been inactive for a
period of time, select Connect on Demand and designate the number of minutes you want that period of
inactivity to last.
Keep Alive. If you want the Router to periodically check your Internet connection, select Keep Alive. Then
specify how often you want the Router to check the Internet connection. If the connection is down, the Router
will automatically re-establish your connection.
• Telestra Cable. Telestra Cable is a service that applies to connections in Australia only. If your ISP is Telstra,
then select Telestra Cable.
User Name and Password. Enter the User Name and Password provided by your ISP.
Heart Beat Server. This is the IP address that the Router has, when seen from the Internet. Your ISP will
provide you with the IP Address you need to specify here.
Connect on Demand. If you want the Router to end the Internet connection after it has been inactive for a
period of time, select Connect on Demand and designate the number of minutes you want that period of
inactivity to last.
Keep Alive. If you want the Router to periodically check your Internet connection, select Keep Alive. Then
specify how often you want the Router to check the Internet connection. If the connection is down, the Router
will automatically re-establish your connection.
Chapter 5: Configuring the Wireless-G Broadband Router
The Setup Tab - Basic Setup

Figure 5-7: L2TP Connection Type

Figure 5-8: Telestra Cable Connection Type

15