Direct Code Entry
1. Press and hold the SETUP button until
the red indicator stays on, then release
the SETUP button.
2. Press and release the desired mode
button (
indicator blinks, then stays lit.
3. Enter the 4-digit code from the code
tables (on separate
sheet). Note: after a
valid code entry, the
red indicator turns
off. For an invalid
code, the red indicator
flashes.
4. With your device on,
press ON/OFF. If the
device turns off, no
further programming
is required. Note: If
some buttons do not operate your
equipment, try one of the other codes
for your brand.
Write your codes down here for easy reference
later.
Device
TV
DVD
CBL/SAT
DVR/AUX
,
, etc.). The red
TV
DVR
Device stored Code
TV
7