HP Model 705 - Workstation User Manual page 44

Troubleshooting and Removal/Replacement Procedures
4.
To verify the system operation, type the following at the
CSTM> verify all
Messages similar to the following appear:
Verification has started on device (CPU).
Verification has started on device (FPU).
CSTM>Verification of (FPU) has completed.
CSTM>Verification of (CPU) has completed.
5.
Press
RETURN
6.
To exit the Support Tools Manager, type the following:
CSTM> exit
If any tests failed, further diagnosis is necessary by qualified service personnel. Contact
your designated service representative.
3–8
RETURN
to return to the prompt after all test results are reported.
CSTM>
RETURN
prompt:
CSTM>