Samsung WB2100 User Manual page 121

Hide thumbs Also See for SAMSUNG WB2100:
Table of Contents

Advertisement

Camera maintenance
If you reconnect the power cable when the battery is fully charged, the status
lamp turns on for approximately 30 minutes.
Using the flash or recording videos depletes the battery quickly. Charge the
battery until the red status lamp turns off.
If the status lamp blinks in red, reconnect the cable, or remove the battery and
insert it again.
If you charge the battery when the cable is overheated or the temperature is too
high, the status lamp may blink in red. Charging will start when the battery cools
down.
Overcharging batteries may shorten battery life. After charging is finished,
disconnect the cable from your camera.
Do not bend or place heavy objects on the AC cable. Doing so may damage the
cable.
Notes about charging with a computer connected
Use only the provided USB cable.
The battery may not charge when:
-
you use a USB hub
-
other USB devices are connected to your computer
-
you connect the cable to the port on the front side of your computer
-
the USB port of your computer does not support the power output standard
(5 V, 500 mA)
Handling and disposing of batteries and chargers with care
Never dispose of batteries in a fire. Follow all local regulations when you dispose
of used batteries.
Never place batteries or cameras on or in heating devices, such as microwave
ovens, stoves, or radiators. Batteries may explode when they are overheated.
120
Appendixes

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wb2100

Table of Contents