Configuration Conversion Utility - 3Com 3CR17251-91 - Switch 5500G-EI Stackable Gigabit Ethernet Getting Started Manual

Configuration
Conversion Utility
Use the admin default user name (no password) to login and carry out
initial Switch setup.
To set a password for the admin user in the CLI, enter the following from
system view:
[5500G-EI]local-user admin <cr>
[5500G-EI-luser-admin]password simple xxxxxxxx
(where xxxxxxxx is your chosen password).
Save the configuration in the User View.
For information on the lost password procedure please refer to the
Configuration Guide that is supplied with your Switch.
The 3Com Switch 5500 Family Configuration Conversion Utility (CCU)
enables you to convert the key configuration parameters from a range of
3Com SuperStack II and SuperStack 3 devices to the configuration file
format used by your Switch 5500 Family unit. The utility provides
conversion for a number of Switch features
To download the CCU package, select the CCU link on the CD that
accompanies your Switch 5500. Alternatively, the CCU download and
further information is available at:
http://www.3com.com/switchmigration/

Configuration Conversion Utility

69