9. Refit the covering strip.
Fitting the plinth
For the efficient operation of the appliance, it is
important that the original ventilation grid is
¥ For an opening height dimension A=820 mm and a
plinth height dimension a=100 mm, the plinth may
be fitted without adjustments. The same applies to
an opening height dimension B=870 mm and a
plinth height dimension b=150 mm.
¥ For plinth heights greater than a=100 mm,
b=150 mm, a cut should be made in the plinth,
580 mm wide, in the centre of the appliance posi-
tion, leaving a remaining height of a=100 mm,
¥ Attach plinth to the kitchen units.
The plinth must be positioned at a minimun dis-
tance of 25 mm from the door.