Table of Contents
Advertisement
4 Use the alarm
timer
Set an alarm
Note
•
Make sure that you have set the clock correctly.
You can set two alarms.
AL1
2 sec.
AL1
AL1
AL1
AL1
1
Press and hold AL1/AL2 for more than two
seconds to activate alarm setting mode.
» The current alarm time (if set) is
displayed.
» The hour digits and alarm icon begin
to blink.
2
Rotate the knob to set the hour.
3
Press the knob to confirm.
» The minute digits blink.
4
Repeat steps 2-3 to set the minute, select
an alarm source ([BUZZ], [DOCK] or
[FM]), and adjust the alarm volume.
» The corresponding alarm icon lights up.
EN
Note
•
If iPod/iPhone is selected as alarm source, but no iPod/
iPhone is connected, the device switches to buzzer
instead.
•
The gentle wake-up function is available for [DOCK]
and [FM]source.
Activate/deactivate the alarm
timer
1
Press AL1 (or AL2) to view alarm settings.
2
Press AL1 (or AL2) repeatedly to select
[ON] or [OFF].
• [ON]: The alarm timer is activated.
• [OFF]: The alarm timer is deactivated.
» AL1 (or AL2) is displayed when the
alarm timer is activated.
» AL1 (or AL2) disappears when the
alarm timer is deactivated.
Snooze the alarm
When an alarm sounds, press SNOOZE.
» The alarm repeats after 9 minutes.
Stop the alarm
When an alarm sounds, press AL1 (or AL2).
» The alarm stops and then repeats at
the same time of next day.
Page 8
Advertisement
Table of Contents
