Panasonic KX-TDE100 Operating Manual page 9

7.
When user information is sent from the PBX to a PC or other external device, the confidentiality of that
information becomes the responsibility of the customer. Before disposing of the PC or other external device,
ensure that data cannot be retrieved from it by formatting the hard disk and/or rendering it physically
unusable.
Notice
SAFETY REQUIREMENTS
For All Telephone Equipment
•
Read and understand all instructions.
For the PBX
•
Keep the unit away from heating appliances and devices that generate electrical noise such as fluorescent
lamps, motors, and televisions. These noise sources can interfere with the performance of the PBX.
•
If you are having problems making calls to outside destinations, follow this procedure to test the CO lines:
1.
Disconnect the PBX from all CO lines.
2.
Connect known working single line telephones (SLTs) to those CO lines.
3.
Make a call to an external destination using those SLTs.
If a call cannot be carried out correctly, there may be a problem with the CO line that the SLT is connected
to. Contact your telephone company.
If all SLTs operate properly, there may be a problem with your PBX. Do not reconnect the PBX to the CO
lines until it has been serviced by an authorized Panasonic Factory Service Center.
Notes
SAFETY REQUIREMENTS
For All Telephone Equipment
•
Never attempt to insert wires, pins, etc. into the vents or holes of the product.
Document Version 2008-10
Important Information
Operating Manual 9