1-4. PRECAUTION ON REPLACING THE SY-143 BOARD
VIDEO OUT Default Data and Exif Model Data Check
When you replace to the repairing board, the written data of repairing board also might be changed to original setting.
When the data has changed because of board replacing etc., check the data setting (VIDEO OUT Default Data, Exif Model Data) is right. If
not, rewrite to the right value.
VIDEO OUT Default Data
Page
4F
Exif Model Data
Page
8F
8F
Writing Method:
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 4F, address: 8D, and set the VIDEO OUT Default Data.
3) Select page: 8F, address: E5 and E6, and set the Exif Model Data.
[Save]
4) Click
on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is "00".
6) Select page: 80, address: 30, and check that the data is "00".
7) Select page: 00, address: 01, and set data: 00.
DSC-W30/W40_L2
Data
Address
NTSC
8D
00
Data
Address
DSC-W30
E5
33
E6
30
PAL
01
DSC-W40
34
30
1-3