Acer Aspire XC600 Service Manual page 28

Acer aspire xc600 desktop service guide
Table of Contents

Advertisement

Note the following before you define a system password:
The maximum length of password contains 8 alphanumeric characters. The following keys are valid:
A-Z, a-z (case-insensitive)
0-9
` - + [ ] \ ; ' , . /,
Special keypad characters: 0-9 / * - +
When you are prompted to enter a password, you have three tries before the system halts. Do not forget
your password. If you forget your password, you may have to return your computer to your dealer to reset
it.
To set a system password:
NOTE
You need to set a supervisor password first before setting the user password.
1.
Select Change Supervisor Password or Change User Password, then press Enter.
The password box appears.
2.
Type a password then press Enter.
IMPORTANT
Be very careful when typing your password because the characters do not appear on the
screen. Only shaded blocks representing each typed character are visible.
3.
Retype the password to verify the first entry, then press Enter.
You will be prompted to save the new password.
4.
Press Enter.
5.
Press F10 to save the password and close the Setup Utility.
To change a system password:
1.
Select Change Supervisor Password or Change User Password, then press Enter.
The password box appears.
2.
Type the original password, then press Enter.
3.
Type a new password, then press Enter.
4.
Retype the new password to verify the first entry, then press Enter.
You will be prompted to save the new password.
5.
Press Enter.
6.
Press F10 to save the password and close the Setup Utility.
To remove a system password:
NOTE
When the supervisor password is removed, the user password will also be remove.
1.
Select Change Supervisor Password or Change User Password, then press Enter.
The password box appears.
2.
Type the original password, then press Enter.
3.
Press Enter twice without entering anything in the new and confirm password fields.
You will be prompted to confirm the password removal.
4.
Press Enter.
5.
Press F10 to save the changes you made and close the Setup Utility.
20
Aspire XC600 Service Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents