Download Print this page
Electrolux WT44CL208 Specification Sheet
Electrolux WT44CL208 Specification Sheet

Electrolux WT44CL208 Specification Sheet

Warewashing 44′′ single tank conveyor dishwasher w/o built in hot water booster wt44

Advertisement

Quick Links

44" Single Tank Conveyor Dishwasher
w/o Built In Hot Water Booster WT44
Warewashing
44" Single Tank Conveyor Dishwasher
without Built In Hot Water Booster WT44
534074 (WT44CL208)
44" Conveyor Dishwasher without
Built in Booster. Left to Right - 208V
534075 (WT44CR208) 44" Conveyor Dishwasher without
Built in Booster. Right to Left - 208V
534076 (WT44CL240)
44" Conveyor Dishwasher without
Built in Booster. Left to Right - 240V
534077 (WT44CR240) 44" Conveyor Dishwasher without
Built in Booster. Right to Left - 240V
Short Form Specification
Item No. ___________________________________
Unit to be Electrolux WT44 Hot Water Sanitizing 44" conveyor dish-
washer without built in hot water booster. Electrical characteristics to be
____ 208 V or ____ 240 V three phase operation. Unit to operate from
___ left to right or ____ right to left. Unit to feature built in rinse booster
pump thus guaranteeing rinse pressure during rinse cycle. Unit to have
two conveyor speeds which can be selected from the control panel by
the operator, 130 racks/hour or a maximum 200 racks/hour. Maximum
water consumption at 200 racks/hour of only 79 gal/hour (0.4 gal/rack).
Unit to feature large heat and noise insulated front counter balanced
door for easy access of internal components. Powerful 2 HP wash pump
and specially designed wash spray arms guaranteed cleaning. Unit to
feature as standard end of day self cleaning cycle. Drain of water from
the machine can be done through the control panel. Large deep drawn
26 gal wash tank.
Covered by Electrolux Platinum Star® Service Program two-year parts
and one-year labor warranty, installation start-up and performance check-
up after one year from installation.
Approval: ___________________________________________
3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789
ITEM # _______________________________________________
MODEL # _____________________________________________
Warewashing
PROJECT NAME # ______________________________________
SIS # _________________________________________________
AIA # _________________________________________________
Main features
• Built in rinse booster pump guarantees constant rinse pressure.
• Speed of conveyor can be set through the control panel by the
operator. 130 racks/hr or 200 racks/hr.
• Large counter balanced inspection doors allow unrestricted all
round access to the wash and rinse area. Door is insulated with
injected foam. This adds strength as well as reduces noise and heat
loss.
• Large filters sloping towards the front to the smaller pressed filter
box for quick removal. Filters feature holes smaller than the concave
ant-block wash nozzles so large food cannot enter and block the
wash system.
• Adjustable feet for full access underneath the machine for cleaning.
• Push button self cleaning cycle of the wash and rinse zones for ease
of "end of day" cleaning.
• Wash chamber without internal pipes and therefore no hidden dirt
traps.
• Self draining wash pumps provide maximum hygiene with no smells
and all wash and rinse zones drain automatically at the push of a
button.
• Powerful 2 HP wash pump.
• Heavy duty stainless steel wash pump (impeller and housing).
• Deep drawn pressed 26 gal wash tank with fully rounded corners,
sloped towards the drain to prevent dirt build up provides fast
drainage in only a few minutes. Pressed wash tank with no welded
points offer a guaranteed water tight solution.
• Dishwasher structure is held together with a solid 2" × 2" stainless
steel tube sub-frame to provide long term sturdiness.
• All main components made in heavy duty anti-corrosive 304 type
stainless steel: tanks, panels, wash & rinse arms and caps, doors,
front, handle, rear and side-panels and rack transportation system.
• Wash and rinse arms can be easily removed for cleaning.
• IPX5 (NEMA4) water protection ensures no damage from cleaning.
• Autostart/stop ensures that the machine runs only when a rack is
passing through it. This reduces both water and energy
consumption.
• Internal curtains made of silastic material and are not affected by
detergent or heat.
• Electronic control panel features large display for reading of wash
and rinse temperatures.
• Low water consumption. At 200 racks per hour, the machine uses
only 79 gal/hr (0.4 gal/rack).
• Machine predisposed for external detergent and rinse aid
connections.
Included Accessories
• Vent cowls (left and right side).
• One open sided dishwasher rack for trays.
• Rack for cups.
• Rack for dinner plates.
Optional Accessories
• Ventilation activation kit.
• Drain water tempering kit.
3048424
Electrolux Professional, Inc.
www.electroluxusa.com/professional

Advertisement

loading

Summary of Contents for Electrolux WT44CL208

  • Page 1 Short Form Specification Item No. ___________________________________ Unit to be Electrolux WT44 Hot Water Sanitizing 44″ conveyor dish- washer without built in hot water booster. Electrical characteristics to be ____ 208 V or ____ 240 V three phase operation. Unit to operate from ___ left to right or ____ right to left.
  • Page 2 Electric Supply voltage: 534074 (WT44CL208) 534075 (WT44CR208) 534076 (WT44CL240) 534077 (WT44CR240) Machine requires one electrical connection. Max. Current absorbed: 208 V/3p/60Hz 240 V/3p/60Hz Water Inlet Water supply pressure: 22 – 102 psi (150 – 700 kPa) Inlet Water supply temperature Rinse circuit: 194 °F (90 °C)
  • Page 3: Front View

    15.56″ 396 mm 31.75″ 534074 & 534076 807 mm 34.81″ Left to Right 884 mm 44″ Single Tank Conveyor Dishwasher without Built In Hot Water Booster WT44 Front View Min 15.75″ Min 400 mm 7.00″ 177 mm 24.50″ 623 mm 27.50″...
  • Page 4 20.75″ 527 mm 0.75″ INSIDE TANK 19 mm HOLE LOCATIONS IN TURNED DOWN PORTION OF TABLE 44″ ″ ″ ″ ″ Single Tank Conveyor Dishwasher without Built In Hot Water Booster WT44 ″ 8.25 210 mm 8.00″ 203 mm 0.88″...

This manual is also suitable for:

Wt44cr208Wt44cl240Wt44cr240534074534075534076 ... Show all