End Of The Washing Programme; Unloading The Dishwasher - Electrolux U30205 Instruction Book

7. To cancel a delay start
To cancel a delay start in progress you have to reset the dishwasher;
follow the same instructions given in "To cancel a washing
programme in progress".
Cancelling a delay start involves also the cancelling of the washing
programme set.
In this case you have to set the washing programme again.

8. End of the washing programme

The dishwasher will automatically stop.
The end indicator light is illuminated.
In the digital display appears 0 (remaining programme time), only
in this case the programme has ended.
Switch off the dishwasher by pressing the On/Off button.
Open the dishwasher's door, leave it ajar and wait a few minutes
before removing the dishes; in this way they will be cooler and the
drying will be improved.

9. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should therefore be
allowed to cool down before removing from the appliance.
Empty the lower basket first and then the upper one; this will
avoid water dripping from the upper basket onto the dishes in the
lower one.
Water may appear on the sides and the door of the dishwasher as
the stainless steel will eventually become cooler then the dishes.
When the washing programme has finished, it is recommended
that the dishwasher is unplugged and the water tap turned off.
Operating instructions
29