Table of Contents
Advertisement
Water drainage
Drain hose
1
The drain hose must not be kinked, crushed or
entangled.
Connecting the drain hose:
– Maximum permitted height: 1 metre.
– Minimum required height: 40 cm above the bot-
tom edge of the appliance.
Extension hoses
• Extension hoses are available from your local Serv-
ice Force Centre. To ensure that the function of the
appliance is not impeded, the internal diameter of
extension hoses must be 19 mm.
• Extension hoses must not be laid more than a
maximum distance of 4 metres horizontally; the
maximum permitted height for the connection for
the drain hose is then 85 cm.
Sink outlet connection
• The outlet of the drain hose (ø 19 mm) fits all com-
monly available sink outlet types. The outer diame-
ter of the sink outlet connection must be at least
15 mm.
• The drain hose must be fixed to the sink outlet
connection using the hose clamp supplied.
Water drainage if the dishwasher is built-
in at high level
If the dishwasher is installed at a high level, and the
drain hose connection is less than 30 cm from the
lower
edge
of
the
ET 111099520 must be fitted by your local Service
Force Centre.
Anti-flood system
For protection from water damage, the dishwasher is
equipped with a anti-flood system.
In the event of a fault, the safety valve immediately
interrupts the supply of water to the appliance and
the drain pump is activated.
In this way water can neither escape nor overflow.
The remaining water in the appliance is automatically
pumped out.
Should a fault occur when the appliance is switched
on, a buzzing tone can also be heard.
appliance,
adapter
kit
35
Hide quick links:
Advertisement
Table of Contents
