Using Your Appliance; Loading Your Appliance; The Lower Basket; The Upper Basket - Electrolux ESI 602 Instruction Book

Electrolux instruction manual dishwasher esi 602
Hide thumbs Also See for ESI 602:
Table of Contents

Advertisement

Using your appliance

Loading your appliance

Before placing dishes in the machine, remove any scraps of
food, to avoid clogging the filters and consequently reducing
the performance.
Do not load very small items which can fall through the
baskets.

The lower basket

The lower basket is designed to take saucepans, lids, plates,
salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the
edge of the basket, ensuring that the upper spray arm can turn
freely.
UI19
UI49
The cutlery basket
Long bladed knives stored in an upright position are a
potential hazard.
Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
Take care when loading or unloading sharp items such as
knives.
Cutlery should be placed in the removable cutlery basket with
the handles facing downwards.
If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with the
handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking
together.
UI04

The upper basket

The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 25 cm in diameter), salad
bowls, cups and glasses.
Arrange items on and
underneath the cup racks so
that water can reach all
surfaces.
Light items (plastic bowls
etc.) should be loaded in the
upper basket and arranged
so they do not move.
Before closing the door,
US64
ensure that the spray arms
can rotate freely.
In case that plates are loaded in the upper
basket:
load them starting from
the rear positions of the
basket; tilting them slightly
forwards and avoiding the
front positions near the
door.
US71
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 32 cm in
diameter) you can load them in the lower basket after moving
the upper basket to the higher position.
To move to the higher position proceed as
follows:
1. Move the front runner stops (A) of the upper basket
outwards and slide the basket out.
2. Refit the basket in the higher position and replace the stops
(A) in their original position.
RC01
When the top basket is in the higher position it will only
take plates up to 20 cm in diameter and you will not be
able to use the cup racks.
After loading your machine always close the door, as an
open door can be a hazard.
Page 7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents