Motorola ATRIX User Manual page 42

that you set up hotspot Security (WPA2 is the most
secure), including password.
To set up your phone as a Wi-Fi hotspot:
1 Turn off Wi-Fi power by touching Menu
Settings Wireless & networks
>
Settings
2 Touch Menu >
Tethering & Mobile hotspot
>
Wi-Fi hotspot
3 Touch
Wi-Fi hotspot settings
4 Touch
security and configuration:
• SSID—Enter a unique name for your hotspot.
• Security—Select the type of security you want:
Open WPA2
or . For
password that others will need to access your
Wi-Fi hotspot.
WPA2
Note: is recommended by IEEE.
• Channel—If you notice interference after your
hotspot has been active for a while, you can try
different channels.
Save
5 Touch when the settings are complete.
When your Wi-Fi hotspot is active, other Wi-Fi enabled
devices can connect by entering your hotspot's
Security
selecting a type, and entering the correct
Wireless password
.
40 Wireless
Wi-Fi
> .
Wireless & networks
>
to turn on the hotspot.
to change hotspot
WPA2
, enter a unique
DLNA™ media devices
You can use DLNA Certified
computers, TVs, and other
devices to play or transfer the
>
videos, pictures, and music
stored on your phone.
1 Make sure your phone is connected to a Wi-Fi™
network that has another DLNA Certified device.
2 Touch
3 Touch
media to phone
Your phone searches for DLNA devices on your
network. To search again, touch Menu
Refresh
4 Choose a device to connect.
For more about DLNA devices, visit www.dlna.org.
Phone network
You should not need to change any network settings.
Contact your service provider for help.
Touch Menu
Mobile networks
SSID
, networks, network selection, operator selection, and
access point names.
DLNA
>
Play media Copy media to server
,
Share media
, or
.
Settings Wireless & networks
> >
to show options for roaming
Copy
,
.
>
>