Table of Contents
Advertisement
Install the water inlet hose
1.Attach the water inlet hoses to water faucet . Using pliers,tighten
the coupling . (As figuer 1)
NOTE:please check if the connection of the
water inlet pipe is proper
2. Connect the other end to the water inlet valve .
( As figure 2)
Jointer of the water inlet hose
Jointer of the
water inlet valve
Water absortion cushion
Check the connection between the water inlet hose and
the water tap
1.Swaying the hose gently to confirm if it is fastened stably .
2.After installation,open the tap to check if it is leaky.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the water inlet hose and the water tap is firm ,
so as to prevent dropping from improve installaiton position
5.After finish washing cycle please pay attention to turn
off the tap .
Take down the water inlet hose
1.Close the water tap.
2. Pull off the water inlet hose from the water tap and washer
The water inlet hose
Figure 1
Figure 2
the water faucet
Advertisement
Table of Contents
