How To Use; Control Panel Features - LG WM3360HVCA Owner's Manual

CONTROL PANEL FEATURES

A
POWER ON/OFF BUTTON
A
Press to turn the washer ON. Press again to turn
the washer OFF.
NOTE: Pressing the ON/OFF button during a
cycle will cancel that cycle and any load settings
will be lost.
B CYCLE SELECTOR kNOB
Turn this knob to select the desired cycle. Once
the desired cycle has been selected, the standard
presets will be shown in the display. These
settings can be adjusted using the cycle setting
buttons anytime before starting the cycle.
C START/PAUSE BUTTON
Press this button to START the selected cycle.
If the washer is running, use this button to PAUSE
the cycle without losing the current settings.
NOTE: If you do not press the START/PAUSE
button within 4 minutes of selecting a cycle, the
washer automatically turns off.
B C
H O W TO U S E
D E
G
D
STEAM BUTTON
Press the STEAM button to add steam to the
selected cycle for added cleaning power.
NOTE: Steam can be added to only the
following cycles: STEAM FRESH™,
ALLERGIENE™, SANITARY, BRIGHT WHITES™,
BULKY/LARGE, PERM. PRESS, COTTON/
NORMAL and HEAVY DUTY.
E TIME AND STATUS
The display shows the settings, estimated time
remaining, options, and status messages for
your washer.
OPTION BUTTONS
F
The option buttons allow you to select additional
cycle options and will light when selected.
Certain buttons also allow you to activate special
functions by pressing and holding the button for
3 seconds.
For detailed information about the individual
options, please see the following pages.
CYCLE SETTING BUTTONS
G
Use these buttons to select the desired cycle
options for the selected cycle. The current
options are shown in the display. Press the
button for that option to view and select other
settings.
F
15