Sensor Software Configuration; Introduction; Set Up Sensor Speed, Checksum (Crc) And Nmea Talker And Sentence Id - ACR Electronics NAUTICAST inland AIS Installation Manual

Automatic identification system
Hide thumbs Also See for NAUTICAST inland AIS:
Table of Contents

Advertisement

3.8 Sensor Software Configuration

3.8.1 Introduction

The NAUTICAST™ AIS requires a connection to various sensor devices. Sensor
Configuration should enable compatibility with existing navigation devises aboard any vessel.
This chapter deals with several ways to configure the NAUTICAST™ and to comply with the
requirements of the specific sensor interfaces.
Configuration and display is visible on two screens of the Sensor Configuration Menu. The
NAUTICAST™ offers the following configuration options:
Set up data speed 4800/9600/38400 baud.
Monitor the connected sensor inputs for each sensor channel.
Verify and edit the Sensor Configuration on the display screen.
Analyze the information received from the connected sensor devices.
Produce an electronic installation report.
Configuration of various NMEA protocols.
The individual options may be repeated until the required configuration for the connected
sensor devices is achieved.
During the configuration process, the NAUTICAST™ is not operational.

3.8.2 Set up Sensor Speed, Checksum (CRC) and NMEA Talker and Sentence ID

The Sensor configuration is accessible via the submenu „5. Sensor Settings‟ in the Service
Password protected menu: „5. Transponder Configuration‟. Please see the appendix in your
User Manual for password information.
N48^12' E 16^26' |1>0.00|2>0.00|3>0.00nm
-----| |
View | +- 2. Region Settings
-----| +- 4. Interrogation Settings
Msg. | +- 6. GPS Settings
-----|
Displ|
----------------------------------------
NUM|Select->|
14
|----------------------------------
| 5. Transponder Configuration
| +- 1. Change User Password
| +- 3. Alarm Settings
| +- 5. Sensor Settings
| +- 7. Inland AIS Configuration
|
|
|<-Back
Y1-03-0212H

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2662

Table of Contents