General Interface Description - ACR Electronics NAUTICAST inland AIS Installation Manual

Components and Interfaces
The diagram below illustrates which devices can be connected to the NAUTICAST™. For a
detailed description of sensor connecting e.g. an existing Gyro to the NAUTICAST™ refer to
Chapter 3.5 "Sensor Interface Definitions."

3.3 General Interface Description

Interface
Sensor 1
Sensor 2
Sensor 3
ECDIS
PILOT
LONG RANGE
DGPS (RTCM SC104)
ALARM CIRCUIT
Y1-03-0212H
Designation Speed
CH 1 4800bps or 38400bps
CH 2 4800bps or 38400bps
CH 3 4800bps or 38400bps
CH 4 38400bps
CH 5 / CH 15 38400bps
CH 8 38400bps
CH 9 9600bps
CH 10 Dry relay contact (power off and alarm state closed)
Direction
Input
Input
Input
Input/Output
Input/Output
Input/Output
Input/Output
7