Lcd Module Reassembly Procedure; Replacing The Antennas - Acer eMachines eM250 Series Service Manual

LCD Module Reassembly Procedure

Replacing the Antennas

1. Remove the protective covering on the Antenna pads. Place the WLAN Antenna pads in the LCD Module and
press down to secure the adhesive in place.
2. Run the cables along the edges of the LCD Module using all the available adhesive securing strips.
3. Remove the protective covering on the Main 3G Antenna pad. Place the pad in the LCD Module and press
down to secure the adhesive in place.
86 Chapter 3