Acer eMachines eM250 Series Service Manual page 92

5. Remove the two screws securing the Hinge Covers to the brackets.
NOTE: The LCD Brackets are not identical. Ensure that the correct bracket is used during reassembly.
Step
Hinge Covers
6. Remove the Hinge Covers from the left and right brackets as shown.
NOTE: If the LCD Brackets are replaced, ensure that the rubber cable connectors are removed from the faulty
brackets and installed on the replacements.
82
Left
Bracket
Size
M2*3
Right
Bracket
Quantity
2
Screw Type
Chapter 3