Advanced - Acer Extensa 2000 Service Manual

Advanced

The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
Hyper-Threading
Technology
Infrared Port
Parallel Port
Mode
Base I/O address
Interrupt
DMA channel
37
Description
The function is supported only when the CPU
installed is 3.06G or above. The system will
automatically hide this selection when detecting the
CPU frequency is below 3.06G or the CPU does not
support Hyper-Threading Technoloty.
Enables, disables or auto detects the infrared port.
Enables, disables or auto detects the parallel port.
Sets the operation mode of the parallel port.
Sets the I/O address of the parallel port.
Sets the interrupt request of the parallel port.
Sets a DMA channel for the printer to operate in
ECP mode. This parameter is enabled only if Mode
is set to ECP.
Options
Enabled
/Disabled
Disabled
/Disabled/Auto
Enabled
/Disabled/Auto
ECP
, EPP, Output only or Bi-
directional
378
/278
IRQ7
/IRQ5
DMA3
/DMA1
Chapter 2