Micr Fonts; Micr Fonts Provided - Xerox 6100BD - Phaser Color Laser Printer User Manual

MICR fonts

MICR fonts provided

MICR User Guide
The Xerox-supplied MICR fonts are required to optimize the
quality of the MICR line and ensure excellent performance. It is
critical that the font character raster patterns and metrics are not
modified in any way and that no new characters are added.
NOTE: Xerox MICR fonts must be used. They may not be
modified in any way.
Xerox provides sets of E13B and CMC7 MICR fonts for
PostScript, PCL, LCDS, and IPDS. The following sections
describe the fonts that you receive.
PostScript fonts
You receive the following PostScript MICR fonts:
• E13B9.PFB: 9-point, 600 dpi E13B. This font can be loaded
and viewed on your PC. Refer to "Loading MICR fonts on a
PC," later in this chapter, for the procedure.
• E13B.PFB: 9.12-point, 600 dpi E13B
• E13B.PS: 9.12-point, 300 dpi E13B
• CMC72510.PFB: 9.06-point, 600 dpi CMC7
NOTE 1: Use the 9.12 point, 600 dpi E13B font for compatibility
with 300 dpi data. These fonts must be implemented at this exact
point size in order to print MICR characters with the correct
dimensions and spacing.
NOTE 2: The E13B.PFB and E13B.PS MICR fonts cannot be
loaded on the printer at the same time. Refer to "MICR Fonts CD-
ROM," later in this chapter, for further details.
PCL fonts
You receive the following PCL fonts, all at 600 dpi resolution:
• CMC72510.HPP
• E13B-609.HPP
• E13B-P.HPP
LCDS fonts
You receive the following LCDS fonts, all at 300 dpi resolution:
• CMC74I.FNT
3