Installing The Base Cover; Removing The Memory; Installing The Memory; Removing The Optical Drive - Dell Vostro 3560 Owner's Manual

Installing the Base Cover

1. Align the edge of the base cover on the computer and slide it on the computer.
2. Tighten the screw(s) to secure the base cover to the computer.
3. Install the battery.
4. Follow the procedures in

Removing the Memory

1. Follow the procedures in
2. Remove the:
a) battery
b) base cover
3. Pry the retention clips away from the memory module until it pops-up. Lift and remove the memory module from its
connector.

Installing the Memory

1. Insert and secure the memory module to the system board.
2. Install the:
a) base cover
b) battery
3. Follow the procedures in

Removing the Optical Drive

1. Follow the procedures in
2. Remove the:
a) battery
b) base cover
3. Remove the screw that secures the optical drive to the computer.
12
After Working Inside Your Computer.
Before Working Inside Your Computer .
After Working Inside Your Computer .
Before Working Inside Your Computer .