Installing The Led Board; Removing The Display-Hinge Walls - Dell Latitude E6430s Owner's Manual

7. Remove the LED board from the LED-board support plate.

Installing the LED Board

1. Tighten the screw to secure the LED board to the LED board support plate.
2. Place the LED board plate in its compartment in the display assembly.
3. Connect the LED board cable to the LED board.
4. Tighten the screw to secure the LED board support plate to the display assembly.
5. Install:
a) display panel
b) display bezel
c) battery
6. Follow the procedures in

Removing the Display-Hinge Walls

1. Follow the procedures in
2. Remove:
a) SD card
b) ExpressCard
c) battery
d) hard drive
e) optical drive
f) base cover
g) keyboard trim
h) keyboard
i) bluetooth module
j) palmrest
48
After Working Inside Your Computer .
Before Working Inside Your Computer .